Embedded Files
WATER METER ITRON
Seri water meter merk Itron banyak digunakan untuk kebutuhan pengukuran dari aliran air pada sistem distribusi air, perlakuan air pada tanaman, bidang industri dan aplikasi kebutuhan komersial lainnya. Akurasi yang ditawarkan alat ini mencapai 2 hingga 5% dengan tekanan maksimal 20 Bar. Sudah mencakup fitur dry-dial, bagian counter sudah dilapisi air-tight, sesuai dengan standar MID dan BRAS. Alat ini cocok untuk pengukuran pada kondisi pipa yang besar dan bisa bertahan dalam kondisi lingkungan yang sulit.
Itron Multi mag DN 20
TECHNICAL SPECIFICATIONS:
Size : 20 mm (3/4inch )
Type : Multimag
Kelas Akurasi/Ratio : R 50
Aliran Mula : <18 L/h
Aliran Minimum (Q1) : 50L/h
Aliran transisi (Q2) : 200 L/h
Aliran Nominal ( Q3) : 2.5 m³/h
Aliran Maksimum (Q4) :3.1 m³/h
Aliran Extra multimag : 5.0 m3/h
Temperatur Metrologis maks : 30 ºC
Temperatur Kerja maksimum : 50 ºC
Tekanan Kerja Maksimum : 16 Bar
Pembacaan Maksimum : 9999* m³
Skala Pembacaan Terkcil : 0.02 L
FEATURES AND BENEFITS
»Multijet velocity meter
»Direct magnetic transmission
»Ease of maintenance
»Outstanding metrology
»Very high resistance in difficult environments
Itron Multimag Cyble DN 20 3/4"
TECHNICAL SPECIFICATIONS:
Size : 20 mm (3/4inch )
Type : Multimag Cyble
Kelas Akurasi/Ratio : R 50
Aliran Mula : <18 L/h
Aliran Minimum (Q1) : 50L/h
Aliran transisi (Q2) : 200 L/h
Aliran Nominal ( Q3) : 2.5 m³/h
Aliran Maksimum (Q4) :3.1 m³/h
Aliran Extra multimag : 5.0 m3/h
Temperatur Metrologis maks : 30 ºC
Temperatur Kerja maksimum : 50 ºC
Tekanan Kerja Maksimum : 16 Bar
Pembacaan Maksimum : 9999* m³
Skala Pembacaan Terkcil : 0.02 L
The Multimag TMII Cyble is an excellent multi-jet turbine water meter, ready for automated metering reading (AMR). Following the increasing need of automation in the metering application, Multimag TMII Cyble has been developed in order to provide very good and durable metrology performance combined with fully AMR capabilities.
Itron Multimag DN 15 1/2"
TECHNICAL SPECIFICATIONS:
Size : 15 mm ( ½ Inch )
Type : Multimag
Kelas Akurasi/Ratio : R 50
Aliran Mula : <10 L/h
Aliran Minimum (Q1) : 32 L/h
Aliran transisi (Q2) : 128 L/h
Aliran Nominal ( Q3) : 1.6 m³/h
Aliran Maksimum (Q4) : 2.0 m³/h
Aliran Extra multimag : 3.0 m3/h
Temperatur Metrologis maks : 30 ºC
Temperatur Kerja maksimum : 50 ºC
Tekanan Kerja Maksimum : 16 Bar
Pembacaan Maksimum : 9999* m³
Skla Pembacaan Terkcil : 0.02 L
Multimag adalah meter air jenis turbin multijet dengan register gelas copper-can yang dirancang untuk aplikasi pelanggan rumah tangga dan niaga. Meter Air Multimag memadukan teknologi komponen hidrolik multijet yang handal dengan ketahanan jangka panjang dari register ekstra kering (extra-dry). Melalui transmisi magnetik yang presisi, komponen register seluruhnya terlindung dari kontak dengan air yang melalui meter.
Itron Multimag Cyble DN 15 1/2"
TECHNICAL SPECIFICATIONS:
Size : 15 mm ( ½ Inch )
Type : Multimag TMII Cyble
Kelas Akurasi/Ratio : R 50
Aliran Mula : <10 L/h
Aliran Minimum (Q1) : 32 L/h
Aliran transisi (Q2) : 128 L/h
Aliran Nominal ( Q3) : 1.6 m³/h
Aliran Maksimum (Q4) : 2.0 m³/h
Aliran Extra multimag : 3.0 m3/h
Temperatur Metrologis maks : 30 ºC
Temperatur Kerja maksimum : 50 ºC
Tekanan Kerja Maksimum : 16 Bar
Pembacaan Maksimum : 9999* m³
Skla Pembacaan Terkcil : 0.02 L
The Multimag TMII Cyble is an excellent multi-jet turbine water meter, ready for automated metering reading (AMR). Following the increasing need of automation in the metering application, Multimag TMII Cyble has been developed in order to provide very good and durable metrology performance combined with fully AMR capabilities.
Itron Multimag TM DN 25 1"
TECHNICAL SPECIFICATIONS:
Size : 25 mm ( 1 Inch )
Type : Multimag
Kelas Akurasi/Ratio : R 50
Aliran Mula : <25 L/h
Aliran Minimum (Q1) : 80L/h
Aliran transisi (Q2) :320 L/h
Aliran Nominal ( Q3) : 4.0 m³/h
Aliran Maksimum (Q4) :5.0 m³/h
Aliran Extra multimag : 7.0 m3/h
Temperatur Metrologis maks : 30 ºC
Temperatur Kerja maksimum : 50 ºC
Tekanan Kerja Maksimum : 16 Bar
Pembacaan Maksimum : 9999* m³
Skla Pembacaan Terkcil : 0.02 L
FEATURES AND BENEFITS
»Multijet velocity meter
»Direct magnetic transmission
»Ease of maintenance
»Outstanding metrology
»Very high resistance in difficult environments
Itron Multimag Cyble DN 25 1"
TECHNICAL SPECIFICATIONS:
Size: 25 mm ( 1 Inch )
Type: Multimag Cyble
Kelas Akurasi/Ratio: R 50
Aliran Mula: <25 L/h
Aliran Minimum (Q1): 80L/h
Aliran transisi (Q2): 320 L/h
Aliran Nominal ( Q3): 4.0 m³/h
Aliran Maksimum (Q4): 5.0 m³/h
Aliran Extra multimag: 7.0 m3/h
Temperatur Metrologis maks: 30 ºC
Temperatur Kerja maksimum: 50 ºC
Tekanan Kerja Maksimum: 16 Bar
Pembacaan Maksimum: 9999* m³
Skla Pembacaan Terkcil: 0.02 L
The Multimag TMII Cyble is an excellent multi-jet turbine water meter, ready for automated metering reading (AMR). Following the increasing need of automation in the metering application, Multimag TMII Cyble has been developed in order to provide very good and durable metrology performance combined with fully AMR capabilities.
Itron Multimag TM DN 40 1,5"
TECHNICAL SPECIFICATIONS:
Size : 25 mm ( 1 Inch )
Type : Multimag
Kelas Akurasi/Ratio : R 50
Aliran Mula : <25 L/h
Aliran Minimum (Q1) : 80L/h
Aliran transisi (Q2) :320 L/h
Aliran Nominal ( Q3) : 4.0 m³/h
Aliran Maksimum (Q4) :5.0 m³/h
Aliran Extra multimag : 7.0 m3/h
Temperatur Metrologis maks : 30 ºC
Temperatur Kerja maksimum : 50 ºC
Tekanan Kerja Maksimum : 16 Bar
Pembacaan Maksimum : 9999* m³
Skla Pembacaan Terkcil : 0.02 L
FEATURES AND BENEFITS
Multijet velocity meter
Direct magnetic transmission
Ease of maintenance
Outstanding metrology
Very high resistance in difficult environments
Itron Multimag Cyble DN 40 1,5"
TECHNICAL SPECIFICATIONS:
Size: 40 mm ( 1 ½inch )
Type: Multimag
Kelas Akurasi/Ratio: R 50
Aliran Mula: <70L/h
Aliran Minimum (Q1): 200L/h
Aliran transisi (Q2): 800 L/h
Aliran Nominal ( Q3): 10.0 m³/h
Aliran Maksimum (Q4):12.5 m³/h
Aliran Extra multimag: 20.0 m3/h
Temperatur Metrologis maks: 30 ºC
Temperatur Kerja maksimum: 50 ºC
Tekanan Kerja Maksimum: 16 Bar
Pembacaan Maksimum: 99999* m³Skla
Pembacaan Terkcil: 0.02 L
The Multimag TMII Cyble is an excellent multi-jet turbine water meter, ready for automated metering reading (AMR). Following the increasing need of automation in the metering application, Multimag TMII Cyble has been developed in order to provide very good and durable metrology performance combined with fully AMR capabilities.
Itron Flostar DN 40 1,5"
Flostar M is a water meter Initially approved EEC 75/33/ISO4064-1:1993 Class C horizontal meter, the first in the category, Flostar M is also approved MID 2004/22/CE – MI 001.
In conformity with most of standards applicable for water meters, Flostar M is a world class meter. Adapted for severe environmental conditions, giving not only an initial excellent accuracy, but also the most stable accuracy over time among all water meters, Flostar M is the best solution for water metering in sizes DN40 up to DN150 (inclusive).
Flostar M is easily upgraded to a real intelligent meter, since it is pre-equipped to interface with any Itron’s AMR package.
Features + Benefits
Key Features Main BenefitsSizes: DN 40-DN50-DN65-DN80-DN100-DN150
MID Approved
EEC/ISO Approved Class C
Patented ball pivoting and semi parabolic turbine (DN150)
Mobile Universal Flanges for DN65 up to DN150 (inclusive)
Glass/metal extra dry register pre-equipped for AMR.
Compliant to: ISO4064-1:2005, OIMLR-49/1:2006, EN14154-1:2005
Other approvals: NOM (Mexico); Korean Legal Metrology, INMETRO (Brazil)
High reliability
Wide measuring range
Stable accuracy
Durable low flow performances
Pre-equipped for future com
Itron Flostar DN 50 2"
METROLOGICAL CHARACTERISTICS
Nominal diameter (DN) : 50 mm
Minimal flowrate (Q1) : ≥ 100 l/h
Transition flowrate (Q2) : ≥ 160 l/h
Permanent flow rate (Q3) : 25 m³/h
Overload flow rate (Q4) : 31.25 m³/h
Dynamic (Q3/Q1) : ≤ 250
Standar ratio (Q3/Q1) : 250
Q2/Q1 : 1.6
Accuracy class : 2
Temperature class : T50 derajad celcius
Maximum Admissible Pressure : 16 bar
Orientation : Horizontal
Indicating range : 999999 m³
Verification scale interval : 0.5 L
Climatic influence class : +5 derajad celcius ; +55 derajad celcius
Starting flow : 32 l/h
Accuracy ± 2% from : 80 l/h
Accuracy ± 5% from : 60 l/h
Admissible peak flow (2 hrs. max.) : 50 m³/h
Maximum temperature for short period : 60 derajad celcius
Maximum admissible pressure : 16 bar
Cyble HF pulse weight : 10 L
Itron Woltex DN 50 2"
SPESIFICATON
Size: 50 mm ( 2 inch )
Type: woltex
Starting Flowrate: 0.19 m³/h
Accuracy ± 2% From*: 0.4 m³/h
Accuracy ± 5% From*: 0.35 m³h
Admissible Flow ( 10’Max ): 90 m³/h
MAX.Admissible Flowrate ( continuous): 50 m³/h
Head loss at Qmax: 0.2 Barmax.
Admissible temperatur: 50 º Cmax.
Admissible Presure: 20
BarIndicating range: 9999999.9 m³
Cyble HF pulse weigt: 10 L
Itron Flostar DN 60 2,5"
METROLOGICAL CHARACTERISTICS
Nominal diameter (DN) : 65 mm
Minimal flowrate (Q1) : ≥ 100 l/h
Transition flowrate (Q2) : ≥ 160 l/h
Permanent flow rate (Q3) : 25 m³/h
Overload flow rate (Q4) : 31.25 m³/h
Dynamic (Q3/Q1) : ≤ 250
Standar ratio (Q3/Q1) : 250
Q2/Q1 : 1.6
Accuracy class : 2
Temperature class : T50 derajad celcius
Maximum Admissible Pressure : 16 bar
Orientation : Horizontal
Indicating range : 999999 m³
Verification scale interval : 0.5 L
Climatic influence class : +5 derajad celcius ; +55 derajad celcius
Starting flow : 32 l/h
Accuracy ± 2% from : 80 l/h
Accuracy ± 5% from : 60 l/h
Admissible peak flow (2 hrs. max.) : 50 m³/h
Maximum temperature for short period : 60 derajad celcius
Maximum admissible pressure : 16 bar
Cyble HF pulse weight : 10 L
Itron Woltex DN 65 2,5"
SPESIFICATON
Size : 65 mm ( 2½ inch )
Type : woltex
Starting Flowrate : 0.22 m³/h
Accuracy ± 2% From* : 0.6 m³/h
Accuracy ± 5% From* : 0.5 m³h
Admissible Flow ( 10’Max ) : 200 m³/h
MAX.Admissible Flowrate ( continuous) : 80 m³/h
Head loss at Qmax : 0.5 Bar
max.Admissible temperatur : 50 º C
max.Admissible Presure : 20 Bar
Indicating range : 9999999.9 m³
Cyble HF pulse weigt : 10 L
Itron Flostar DN 80 3"
SPESIFICATON
Nominal diameter (DN) : 80 mm
Minimal flowrate (Q1) : ≥ 157.5 l/h
Transition flowrate (Q2) : ≥ 252 l/h
Permanent flow rate (Q3) 63 m³/h
Overload flow rate (Q4) : 78.75 m³/h
Dynamic (Q3/Q1) : ≤ 400
Standar ratio (Q3/Q1) : 315
Q2/Q1 : 1.6
Accuracy class : 2
Temperature class : T50 derajad celcius
Maximum Admissible Pressure : 16 bar
Orientation : Horizontal
Indicating range : 999999 m³
Verification scale interval : 0.5 L
Climatic influence class : +5 derajad celcius ; +55 derajad celcius
Starting flow : 35 l/h
Accuracy ± 2% from : 120 l/h
Accuracy ± 5% from : 100 l/h
Admissible peak flow (2 hrs. max.) : 60 m³/h
Maximum temperature for short period : 60 derajad celcius
Maximum admissible pressure : 20 bar
Cyble HF pulse weight : 10 L
Itron woltex DN 80 3"
SPESIFICATON
Size: 80 mm (3 inch )
Type: Woltex
Starting Flowrate: 0.03 m³/h
Accuracy ± 2% From*: 1.2 m³/h
Accuracy ± 5% From*: 0.75 m³h
Admissible Flow ( 10’Max ): 250 m³/h
MAX.Admissible Flowrate ( continuous): 120 m³/h
Head loss at Qmax: 0.55 Barmax.
Admissible temperatur: 50 º Cmax.
Admissible Presure: 20 Bar
Indicating range: 9999999.9 m³
Cyble HF pulse weigt: 10 L
Itron Flostar DN 100 4"
SPESIFICATON
Nominal diameter (DN) : 100 mm
Minimal flowrate (Q1) : ≥ 250 l/h
Transition flowrate (Q2) : ≥ 400 l/h
Permanent flow rate (Q3) : 100 m³/h
Overload flow rate (Q4) : 125 m³/h
Dynamic (Q3/Q1) : ≤ 400
Standar ratio (Q3/Q1) : 315
Q2/Q1 : 1.6
Accuracy class : 2
Temperature class : T50 derajad celcius
Maximum Admissible Pressure : 16 bar
Orientation : Horizontal
Indicating range : 999999 m³
Verification scale interval : 0.5 L
Climatic influence class : +5 derajad celcius ; +55 derajad celcius
Starting flow : 70 l/h
Accuracy ± 2% from : 280 l/h
Accuracy ± 5% from : 170 l/h
Admissible peak flow (2 hrs. max.) : 135 m³/h
Maximum temperature for short period : 60 derajad celcius
Maximum admissible pressure : 20 bar
Cyble HF pulse weight : 10 L
Itron Flostar DN 150 6"
SPESIFICATON
Nominal diameter (DN) : 150 mm
Minimal flowrate (Q1) : ≥ 254 l/h
Transition flowrate (Q2) : ≥ 406 l/h
Permanent flow rate (Q3) : 160 m³/h
Overload flow rate (Q4) : 200 m³/h
Dynamic (Q3/Q1) : ≤ 630
Standar ratio (Q3/Q1) : 315
Q2/Q1 : 1.6
Accuracy class : 2
Temperature class : T30 derajad celcius
Maximum Admissible Pressure : 20 bar
Orientation : Horizontal
Indicating range : 9999999m³
Verification scale interval : 2 L
Starting flow : 90 l/h
Accuracy ± 2% from : 300 l/h
Accuracy ± 5% from : 200 l/h
Admissible peak flow (2 hrs. max.) : 260 m³/h
Maximum temperature for short period : 60 derajad celcius
Maximum admissible pressure : 20 bar
Cyble HF pulse weight : 100 L
Itron Woltex DN 150 6"
SPESIFICATION
Size: 150 mm (6 inch )
Type: Woltex
Starting Flowrate : 1 m³/h
Accuracy ± 2% From* : 3 m³/h
Accuracy ± 5% From* :1.5 m³h
Admissible Flow ( 10’Max ) : 700 m³/hMAX
Admissible Flowrate ( continuous) : 500 m³/h
Head loss at Qmax : 0.15 Barmax.
Admissible temperatur : 50 º Cmax.
Admissible Presure : 20 Bar
Indicating range : 99999999 m³
Cyble HF pulse weight : 100 L
Page updated
Google Sites
Report abuse