Flow Meter Avery Hardoll BM250

• Size : 2 1/2 Inch

• Repeatability Typically:± 0.02%

• Max Working Pressure:10.5 Bar (150 Psi)

• Hydraulic Test pressure :300 Psi

• Max Working Temperature : – 28° to 100°C

• Volume per-revolution:2.27 LITER/min

• Flange Rating : Ductile Iron Steel ASA 150 FF

• Flowrate :25 ~ 250 Imp Gallon

• Flowrate :115 ~ 1140 l/m

• Flowrate : 7 ~ 68 m3/h

Deskripsi

Avery Hardoll BM250

flow-meter-avery-hardoll-bm-250 Avery-Hardoll flowmeters are precision made, positive displacement, liquid measuring instruments that maintain accurate metering over long periods of operation. Simplicity of design and construction together with sustained accuracy has led to the widespread use of BM Series meters on aviation refuelling vehicles as well as master meters for use in calibration throughout the world.

Liquid Controls is committed to maintaining the decades long legacy of Avery-Hardoll quality and precision in aviation fueling. Inside their state of the art manufacturing and testing facility in Lake Bluff, Illinois, Avery-Hardoll metering products are manufactured and vigorously 100% flow tested before being put into service.
The BM Series flowmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, such as turbulence from nearby valves, bends, and other system conditions.
The BM-850 with mechanical register.
The BM-850 with mechanical register.

Positive displacement measurement
115 to 3780 LPM (30 to 1000 GPM) flow rates
Unequalled performance in measurement
The positive displacement principle is the ONLY accurate method of measuring fluid flow. No other technology can achieve such accuracy because measurement becomes inferred, which is indirect and subject to assumption. The Avery-Hardoll® bulkmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, eg. turbulence from nearby valves, bends, etc.

Flow Meter Avery Hardoll BM450 (Double Capsule) 3 Inch

• MANIFOLD : Fabricated steel or ductile iron(ductile iron not available on triple capsule meters)

• BODY : Ni-Resist cast iron

• VANES : Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• OUTER COVERS : Aluminium or Ni-Resist cast iron

• INNER COVERS : Ni-Resist cast iron

• BEARINGS : Stainless steel

Flow Meter Avery Hardoll BM450 (Double Capsule)

• Manifold 3 inch, Flow Rate 200-2050 Liters

• Mxmimum Working Pressure : 10.5 bar (150 psi)

• Test Pressure : 21 bar (300 psi)

• Temperature Range : -280 C to 1000 C

• Volume per revolution : 2.27 litres

• Repeatability Typically : 0.02%

Avery-Hardoll Double Capsule BM450 Positive Displacement flow meter BM Series dibuat dengan presisi tinggi sebagai alat pengukur cairan yang mempertahankan tingkat akurasi tertinggi selama jangka waktu masa operasi. Kesederhanaan desain dan akurasi tinggi menjadikan Avery-Hardoll BM Series meter sebagai flowmeter yang paling disukai oleh banyak perusahaan besar di dunia.

FLOW METER AVERY HARDOLL BM550 4 INCH, METERAN OIL AVERY HARDOLL, FLOW METER, OIL METER, AVERY HARDOLL, AVERYHARDOLL, FLOWMETER 4 IN 

Features :

• Positive displacement measurement

• 115 to 4000 LPM (30 to 1000 GPM) flow rates

• Unequalled performance in measurement

No other technology can achieve such accuracy because measurement becomes inferred, which is indirect and subject to assumption.

The Avery-Hardoll® bulkmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, eg. turbulence from nearby valves, bends, etc.

CONSTRUCTION

• MANIFOLD : Fabricated steel or ductile iron (ductile iron not available on triple capsule meters)

• BODY : Ni-Resist cast iron

• VANES : Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• OUTER COVERS : Aluminium or Ni-Resist cast iron

• INNER COVERS : Ni-Resist cast iron

• BEARINGS : Stainless steel

Flow Meter Avery Hardoll BM550 (Double Capsule)

• Manifold 4 inch, Flow Rate 220-2280 Liters

• Mxmimum Working Pressure : 10.5 bar (150 psi)

• Test Pressure : 21 bar (300 psi)

• Temperature Range : -280 C to 1000 C

• Volume per revolution : 2.27 litres

• Repeatability Typically : 0.02%

AVERY HARDOLL BM650 FLOW METER

FLOW METER AVERY HARDOLL BM650 (4 INCH), METERAN OIL AVERY HARDOLL, FLOW METER, OIL METER, AVERY HARDOLL, AVERY-HARDOLL, 4 INCH

Features :

• Positive-Displacement Measurement

• 115 to 4000 LPM (30 to 1000 GPM) Flow Rates

• Unequalled Performance in Measurement

 No other technology can achieve such accuracy because measurement becomes inferred, which is indirect and subject to assumption. The Avery-Hardoll® bulkmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, eg. turbulence from nearby valves, bends, etc.

CONSTRUCTION

• MANIFOLD : Fabricated steel or ductile iron (ductile iron not available on triple capsule

meters)

• BODY : Ni-Resist cast iron

• VANES : Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• OUTER COVERS : Aluminium or Ni-Resist cast iron

• INNER COVERS : Ni-Resist cast iron

• BEARINGS : Stainless steel

Flow Meter Avery Hardoll BM650 (Double Capsule)

• Manifold 4 inch, Flow Rate 300-3000 Liters

• Mxmimum Working Pressure : 10.5 bar (150 psi)

• Test Pressure : 21 bar (300 psi)

• Temperature Range : -280 C to 1000 C

• Volume per revolution : 2.27 litres

• Repeatability Typically : 0.02%

Avery Hardoll Flow Meter BM750 6 Inch

Features :

The BM Series flowmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, such as turbulence from nearby valves, bends, and other system conditions.

• Positive displacement measurement

• 115 to 4000 LPM (30 to 1000 GPM) flow rates

• Unequalled performance in measurement

The positive displacement principle is the ONLY accurate method of measuring fluid flow.  No other technology can achieve such accuracy because measurement becomes inferred, which is indirect and subject to assumption. The Avery-Hardoll® bulkmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, eg. turbulence from nearby valves, bends, etc.

CONSTRUCTION

• MANIFOLD : Fabricated steel or ductile iron (ductile iron not available on triple capsule

meters)

• BODY : Ni-Resist cast iron

• VANES : Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• OUTER COVERS : Aluminium or Ni-Resist cast iron

• INNER COVERS : Ni-Resist cast iron

• BEARINGS : Stainless steel

Flow Meter Avery Hardoll BM750

• Manifold 6 inch. Flow Rate 300-3000 Liters

• Mxmimum Working Pressure : 10.5 bar (150 psi)

• Test Pressure : 21 bar (300 psi)

• Temperature Range : -280 C to 1000 C

• Volume per revolution : 2.27 litres

• Repeatability Typically : 0.02%

AVERY HARDOLL BM850 FLOW METER (6 INCH)

Flow Meter Avery-Hardoll BM850, METERAN OIL AVERY HARDOLL, FLOW METER, OIL METER, AVERY HARDOLL, AVERYHARDOLL, FLOWMETER, Positive Displacement

Features Flow Meter Avery-Hardoll BM850 :

The BM Series flowmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, such as turbulence from nearby valves, bends, and other system conditions.

• Positive displacement measurement

• 115 to 4000 LPM (30 to 1000 GPM) flow rates

• Unequalled performance in measurement

The positive displacement principle is the ONLY accurate method of measuring fluid flow.  No other technology can achieve such accuracy because measurement becomes inferred, which is indirect and subject to assumption. The Avery-Hardoll® bulkmeter directly converts volume to rotational output with minimum scope for error and with minimal disturbance from surrounding conditions, eg. turbulence from nearby valves, bends, etc.

CONSTRUCTION

• MANIFOLD : Fabricated steel or ductile iron (ductile iron not available on triple capsule meters) 

• BODY : Ni-Resist cast iron

• VANES : Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• OUTER COVERS : Aluminium or Ni-Resist cast iron

• INNER COVERS : Ni-Resist cast iron

• BEARINGS : Stainless steel

Flow Meter Avery Hardoll BM850

• Size : 6 Inch

• Repeatability Typically : ± 0.02%

• Max Working Pressure : 10.5 Bar (150 Psi)

• Hydraulic Test pressure : 300 Psi

• Max Working Temperature :- 28° to 100°C

• Volume per-revolution : 6.82 LITER/min

• Flange Rating : Ductile Iron Steel ASA 150 FF

• Flowrate : 85~850 Imp Gallon

• Flowrate : 387 ~ 3870 l/m

• Flowrate : 23 ~ 232 m3/hr

• Type : Direct Reading

AVERY HARDOLL BM 950

Oil Flow Meter Avery Hardoll BM 950 Single Capsule
Meter Series : BM 950
Size : 3 inch
Repeatability Typically:± 0.02%
Max Working Pressure:10.5 Bar (150 Psi)
Hydraulic Test pressure :300 Psi
Max Working Temperature : – 28° to 100°C
Volume per-revolution:2.27 LITER/min
Flange Rating : Ductile Iron Steel ASA 150 FF

CONSTRUCTION

• MANIFOLD : Fabricated steel or ductile iron (ductile iron not available on triple capsule

meters)

• BODY : Ni-Resist cast iron

• VANES : Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• OUTER COVERS : Aluminium or Ni-Resist cast iron

• INNER COVERS : Ni-Resist cast iron

• BEARINGS : Stainless steel

Flow Meter Avery Hardoll BM950

• Size: 3 inch

• Repeatability Typically : ± 0.02%

• Max Working Pressure : 10.5 Bar (150 Psi)

• Hydraulic Test pressure : 300 Psi

• Max Working Temperature : - 28° to 100°C

• Volume per-revolution : 2.27 LITER/min

• Flange Rating : Ductile Iron Steel ASA 150 FF

• Flowrate : 30~300 Imp Gallon

• Flowrate : 130 ~ 1370 l/m

• Flowrate : 8 ~ 82 m3/hr

• Type : Direct Reading

CALIBRATION

Calibration adjustment is provided to minimize the meter error at any selected flowrate. Adjustment isstepless; no gear changing is necessary; and the calibration screw is easily accessible after breaking aseal and removing a sealing screw.All meters are tested to 300 psi (21 bar).All Avery-Hardoll meters are tested before despatch at a range of flowrates and test certificates can besupplied if requested.The fluid used for testing is odorless kerosene.Specific gravity at 60/60ºF, 15/15ºC = 0.8Viscosity at 60ºF, 15ºC = 2.4 centistokes.Suggested correction to be made to the calibrating mechanism when used with products with differentviscosities as follows:Gasoline+ 0.1%Kerosene0.0%Gas Oil– 0.1%Fuel Oil–0.22%+means increase counter readings–means decrease counter readings

Flow Meter Avery Hardoll CM 1000

• Meter Size : 2,5 Inch

• Model : CM 1000

• Flow Rate : 22 to 220 (Imp Gall), 100 to 1000 (Lpm), 6 to 60(m3/hr)

• Flanges : ASA 125 FF Ductile Iron Steel

DETAIL AVERY HARDOLL FLOWMETER CM 1400 3 Inch ( 76mm)

• Mechanical Bulk Meter CM Series ‘ Bulk Meters’ from Avery Hardoll provide the following : – Bulk Meter Flow rates from 100 Lpm to 5500 Lpm. Not effected by outside factors caused by the installation. Stepless calibration system. Accuracy consistent between calibration levels. Bulk meters suitable for use in distribution depots and aviation refuelling vehicles. Repeatability better than 0.02% . Automatic additive injector available. Electronic bulk meter control available.

Specification

• Serviceability: bulk meters designed for quick and easy maintenance.

• Construction Manifold : Fabricated steel Ductile Iron ( Single/ Double capsule) Cast Aluminium ( 6″ Triple Only)

• Body : Ni-Resist cast iron Vanes :

• Carbon Rotor : Aluminium or Ni-Reset Cast Iron

• Covers : Carbon Bearings :

• Stainless Steel Seals : High nitrile or Fluorocarbon Spesification

• Maximum Working pressure : 10.5 bar ( 150 psi)

• Test pressure : 21 bar ( 300 psi)

• Temperature range : -28º C to 100º C

• Volume per revolution : 2.27 litres ( single capsule) 4.54 litres ( double capsule) 6.82 litres ( triple capsule) : 9.08 litres ( 4 capsule)

• Repeatability typically : 0.02%

• Flow Range CM 1400

• Pipe Line Size : 3″ ( 76mm)

• Flow Rate : 140 to 1400 lpm 8 to 84 m³ / hr

• Flanges : ASA 125 FF

• Material : Ductile Iron

FLOW METER AVERY HARDOLL CM 2000

• Info Lebih Lanjut

• Silahkan Tanya melalui Whatsapp dengan klik tombol:

• Chat Whatsapp

CONSTRUCTION : 

• MANIFOLD : Ductile iron (single/double capsule)

• Fabricated steel (all builds)

• Cast Aluminium (6’’ Triple only)

• BODY : Ni-Resist cast iron

• VANES :Carbon

• ROTOR : Aluminium or Ni-Resist cast iron

• COVERS : Carbon Steel

• BEARINGS : Stainless steel

• SEALS : High Nitrile or Fluorocarbon

SPECIFICATION :

• Maximum Working pressure :10.5 bar (150 psi)

• Test pressure : 21 bar (300 psi)

• Temperature range : -28ºC to 100ºC

• Volume per revolution : 2.27 litres (Single capsule)

• 4.54 litres (Double capsule)

• 6.82 litres (Triple capsule)

• 9.08 litres (4 capsule)

• Repeatability typically : 0 .02%

LOW METER AVERY HARDOLL CM 2500

CONSTRUCTION

• MANIFOLD: Ductile iron (single/double capsule)

• Fabricated steel (all builds)

• Cast Aluminium (6’’ Triple only)

• BODY:Ni-Resist cast iron

• VANES:Carbon

• ROTOR: Aluminium or Ni-Resist cast iron

• COVERS: Carbon Steel

• BEARINGS: Stainless steel

• SEALS: High Nitrile or Fluoro carbon

SPECIFICATION

• Maximum Working pressure: 10.5 bar (150 psi)

• Test pressure: 21 bar (300 psi)

• Temperature range: -28ºC to 100ºC

• Volume per revolution: 2.27 litres (Single capsule)

• 4.54 litres (Double capsule)

• 6.82 litres (Triple capsule)

• 9.08 litres (4 capsule)

• Repeatability typically: 0.02%